Rheem 871026 Betriebsanleitung PDF herunterladen (Seite 12)

TEMPERATURE CONTROL – STANDARD

TEMPERATURE SETTINGS – STANDARD CONTROLLER

The temperature settings of each type of controller are:

Bathroom1 & 2 37 C to 46 C (in 1 C increments), 48 C*, 50 C

Kitchen 37 C to 46 C (in 1 C increments), 48 C*, 50 C, 55 C, 60 C

(* limited to 48 C on an 875 series model)

Temperature settings

warm

average hot shower

hot

very hot

The installation of a Bathroom controller(s) only (i.e. no Kitchen controller) limits the outlet temperature of the

water heater to a maximum of:

871 series 50ºC

875 series 48 C

regardless of the preset outlet temperature of the water heater.

The installation of a Kitchen controller will allow a maximum outlet temperature of:

871 series 60ºC

875 series 48 C

regardless of the preset outlet temperature of the water heater.

If controllers are not installed, the water heater defaults to the preset outlet temperature. This may be up to:

871 series 60°C

875 series 48 C

Refer to “How Hot Should The Water Be?” on page 5.

On a building fitted with a temperature limiting device such as a tempering valve and where an 871 series

water heater is installed without a separate untempered hot water line to the kitchen, laundry or other non-

ablution area, although the Kitchen controller will be able to display temperatures above 50°C and the water

leaving the water heater will be at the set temperature, the maximum water temperature which can be

delivered to the hot water outlets in these locations is determined by the temperature setting of the

temperature limiting device. This is usually 50°C.

To enable the delivery of water temperatures above 50°C to the kitchen, laundry or other non-ablution area,

separate untempered pipe work must be installed from the water heater to the hot water outlets in these

locations.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Keine Kommentare

Rheem 871026 Betriebsanleitung Seite 12