Rheem 871024-B Spezifikationen PDF herunterladen (Seite 56)

General Construction

Part B – Specification and Response Requirements

Annexure 2- Minimum Design & Construction Specification

Page 56 Updated 19/07/2013

• Combination Doors (CombiDoor) shall be a solid core door with an opening glass

panel and mesh security grille all set in an aluminium frame, all similar as

manufactured by Combion, or equal approved.

• External Doors to Houses

o External hinged doors shall be either hollow core with 6 mm thick facings or

solid core doors.

• Aluminium sliding doors shall be a minimum of 1800mm width and a minimum width

of 2100mm `from living areas, as detailed on the drawings. The door is to have an

aluminium frame with matching lockable sliding flywire safety doors with black

anodised aluminium flywire. Over the flywire provide an aluminium diamond shaped

grille 83 mm x 68 mm x 7 mm thick in finish matching the door frames and fitted

symmetrically in retaining frame. Securely fix the grille into the frame with

mechanical fixings. Comply with the requirements specified for aluminium windows

and current Australian Standards relating to construction, glass and wind terrain. All

glass in these assemblies is to be safety glass in accordance with AS1288.

• Doors to Walk up Flats

o The entrance door to a flat from the foyer or stairwell shall be as follows:- For

2 storey units 35 mm solid core

o For 3 or more storeys a fire door rated at -/60/30

3.9.1.4 Hardware

General

• Supply and fit all relevant hardware to as scheduled.

• Mount door furniture at height of 1000 mm from bottom of door to the

centre line of the handle, unless detailed otherwise.

External Hinged Doors, Solid Core Doors and Fire Doors

• Hang with three 100mm loose pin light narrow steel butt hinges.

• Locks are required to be Lockwood 303 with lever handles. Front and

rear door locks shall be keyed alike.

• Fit a Whitco W430206 door viewer to the front door at a height of 1500mm

above the internal floor level.

External Aluminium Sliding Doors

• Provide internal snib and external lock keyed alike to external hinged door

locks. Polyester powder coat finish.

Internal Hinged Doors

• Hang with two 85mm loose pin steel butts and fit a mortice latch and lever

handle.

Internal Hinged Doors to Bathroom/Shower

• Hinged as for an internal door with a mortice latch as for an internal door.

Privacy latch to be EFCO indicator privacy set

Internal Sliding Doors

• Sliding door track and fittings similar to Cowdroy Arrow or equal approved.

Two per door 100mm flush pulls.

Doors to Toilet

• Shall meet the requirements of the Building Code of Australia to allow

emergency access, and be fitted with a privacy latch.

Door Closers

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 114 115

Kommentare zu diesen Handbüchern

Keine Kommentare

Rheem 871024-B Spezifikationen Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Warmwasserbereiter & Kessel Rheem 871024-B