Rheem 871026 Betriebsanleitung PDF herunterladen (Seite 72)

DRAINING THE WATER HEATER

To drain the water heater:

Turn off the water heater (refer to “Turn Off The Water Heater” on page 71).

Open a hot tap (preferably the shower outlet).

Unscrew the two drain plugs, one each at the cold water inlet and hot water outlet, on the underside of

the water heater.

Water will drain from the water heater.

When water stops flowing from the water heater, close the hot tap.

Note: It is recommended not to screw the drain plugs back in, until the water heater is to be turned on again.

WATER SUPPLIES

Your water heater is manufactured to suit the water conditions of most Australian metropolitan water

supplies. However, there are some known water supplies that can have detrimental effects on the water

heater and its operation and / or life expectancy. If you are unsure of your water chemistry, you can obtain

information from your local water supply authority.

This water heater is not suitable for connection to bore water or spring water unless a water treatment device

is fitted.

1 2 ... 67 68 69 70 71 72 73 74 75 76

Keine Kommentare

Rheem 871026 Betriebsanleitung Seite 72