Part B – Specification and Response Requirements
Annexure 2- Minimum Design & Construction Specification
Page 59 Updated 19/07/2013
Furniture shall be matching throughout each house.
Provide privacy sets to W.C.s, and bathrooms with external release.
Deadlocks are not to be provided with a key operated internal locking mechanism. Where
provided, the internal operation shall be by large snib.
3.9.7.1 Complying Locks and Door Furniture
540 Ambassador Satin Chrome
Entry Set
500 Ambassador Satin Chrome
Passage Set
Privacy set for Bathrooms
510 Ambassador Satin Chrome
W735305
External Glass Sliding
Doors
YR4050 BLK Single Cylinder Black
Single Security Cylinder Pt745?Cy60
BCK or Austral SD7
Single Security Lock Cylinder Left hand Pf748/Cy60LH
BCK or Austral HD7XSBLL
W841500
3.9.7.2 Mounting Heights
Mount door furniture generally at 1000mm above floor level to centre line of spindle
Make allowance at external doors for fitting of future safety doors.
3.9.7.3 Keying
For each house key alike all external doors including sliding aluminium doors and hinged
doors into carports or garages.
All individual houses in the project shall be keyed to differ, including carport/garage roller
doors.
Use a construction key until hand over to the Trust.
For each house provide three house keys and two roll-up door keys at hand over.
Cylinders to hinged doors shall be 5 pin and match throughout the house.
Aluminium sliding doors shall be keyed to match external hinged doors.
All window locks shall be keyed alike.
3.10 JOINERY
3.10.1 General
Joinery work shall be accurately set out and assembled in the best trade manner.
Wall units shall extend to the ceiling level with ceiling cornice.
Joints in external joinery, e.g. door and window frames, sashes and doors shall be set in an
adhesive complying with one of the following types and used strictly in accordance with the
Kommentare zu diesen Handbüchern